rai decor Shield
Interior-Exterior Transparent Protective Coating
rai decor shield, available in both glossy and matte finishes, is a water-based transparent topcoat designed for long-term durability. This product is enhanced with a special binder and silicone, imparting excellent resistance to dirt buildup and superior water repellency to the treated surface. It is utilized to enhance the luster and durability of decorative effect paints, specifically those applied to exterior and interior walls.
SCOPE OF APPLICATION
rai decor shield is employed for safeguarding the final coat and decorative effect finishes, including textured systems, on both the exterior and interior surfaces of buildings.
FEATURES
- Provides a durable finish with minimal dirt adhesion on the surface.
- Exhibits excellent water-repellent qualities, acting as a barrier against moisture.
- High vapor permeability allows for the release of steam, enabling the surface to breathe.
- Environmentally friendly and non-toxic, being water-based ensures no harm to human health or the environment.
APPLICATION VIDEO
After thoroughly removing any dirt, grease, blistered paint, and dust from the application surface, proceed to rectify surface defects using San Deco Acrylic Putty Interior, followed by an application of San Deco Decoprimer as an undercoat.
-For the first coat, apply Atracto a steel trowel or brush.
-The second coat can also be applied with a trowel or brush, allowing you to achieve the desired effect.
-Allow a minimum of 6 hours between each coat for proper drying. -Ensure that the application environment remains within the temperature range of +5°C to +35°C during and within the 24 hours following the application.
Allow a period of 2-3 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.
The coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods for a single coat:
For Atracto:
- 1 liter covers an area ranging from 8.0 to 12.5 m².
- 1 kilogram covers an area spanning from 6.5 to 10.0 m².
- The paint consumption per 1m² area varies between 80-125 milliliters (ml) and 100-150 grams (gr).
For Atracto Touch:
- 1 liter provides coverage for an area between 8.5 and 13 m².
- 1 kilogram is sufficient for an area of 7 to 11 m².
- The paint consumption for 1m² area falls within the range of 76-118 milliliters (ml) and 90-140 grams (gr).
