raidecor art / art velvet
Metallic Pearl Effect and Quartz Sand Texture Decorative Coating
Introducing raidecor Art, a decorative coating formulated with acrylic emulsion and infused with metallic pigments like gold and silver. Its textured finish exudes a pearlescent allure. Moreover, Sandeco Art Velvet shares similar attributes, featuring a finer grain and a plush, velvety texture.
SCOPE OF APPLICATION
raidecor Art embellishes interior building surfaces such as walls, plasters, exposed concrete, and wooden surfaces. rai decor Art requires appropriate surface preparation and the application of a suitable undercoat for optimal results.
FEATURES
- Contains both organic and inorganic pigments, offering a vibrant, textured surface.
- Provides a stylish, decorative look with metallic pigments and special fillings.
- High water vapor permeability allows for breathability and moisture expulsion.
- Water-based formula ensures safety for human health and the environment.
- Infused with a pleasant fragrance, enhancing the ambiance during application.
APPLICATION VIDEO
raidecor art is an acrylic emulsion-based decorative coating with a pearlescent finish, containing metallic pigments like gold and silver. It provides a textured surface. raidecor art velvet generally shares the same properties and is a finer-grained and softer decorative material.
APPLICATION VIDEO
-After cleaning all kinds of dirt, oil, swollen paint, and dust from the application surfaces, surface defects should be corrected with rai decor Acrylic Paste Fine, and old painted and newly painted surfaces should be primed with rai decor Uniprimer.
– After the primer application, rai decor Art/rai decor Art Velvet is applied to the surface as a single layer without diluting with a wooden brush. While the product is wet, patterns suitable for the desired effect are created on the surface with circular or straight movements using a brush.
– Rai decor Art Velvet application is done with the same method as rai decor Art, only after the final pattern is applied, the product is polished with a plastic spatula or trowel before it dries.
– During and for 24 hours after application, care should be taken to ensure that the ambient temperature is a minimum of +5°C and a maximum of +35°C.
Allow a period of 2-3 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.
For single coat application depending on surface smoothness, absorbency, and application techniques;
– 6.5 – 8.5 m² with 1 liter.
– 1 kg covers an area of 5.0 – 6.5 m².
– Coating consumption for 1 m² area is 120-160 ml and 150-200 grams.
