decoprimer
Interior Wall Effect Paint Primer
This specialized primer is formulated with acrylic emulsion to enhance the adhesion of acrylic-based decorative materials to the surface.
SCOPE OF APPLICATION
Decoprimer is used as an undercoat for acrylic based decorative coating materials applied on all kinds of mineral surfaces like concrete, aerated concrete, pressed bricks or thin plaster, gypsum plaster.
FEATURES
Decoprimer adds a textured finish to the substrate, enhancing its visual appeal.
With outstanding adhesion properties, it effectively primes surfaces for the application of additional decorative materials.
Offering excellent coverage, it ensures efficient use of paint and materials.
This water-based primer is odorless, non-toxic, and eco-friendly, prioritizing environmental sustainability.
APPLICATION VIDEO
After thoroughly removing any dirt, grease, blistered paint, and dust from the application surface, proceed to rectify surface defects using San Deco Acrylic Putty Interior, followed by an application of San Deco Decoprimer as an undercoat.
-For the first coat, apply Atracto a steel trowel or brush.
-The second coat can also be applied with a trowel or brush, allowing you to achieve the desired effect.
-Allow a minimum of 6 hours between each coat for proper drying. -Ensure that the application environment remains within the temperature range of +5°C to +35°C during and within the 24 hours following the application.
Allow a period of 2-3 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.
The coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods for a single coat:
For Atracto:
- 1 liter covers an area ranging from 8.0 to 12.5 m².
- 1 kilogram covers an area spanning from 6.5 to 10.0 m².
- The paint consumption per 1m² area varies between 80-125 milliliters (ml) and 100-150 grams (gr).
For Atracto Touch:
- 1 liter provides coverage for an area between 8.5 and 13 m².
- 1 kilogram is sufficient for an area of 7 to 11 m².
- The paint consumption for 1m² area falls within the range of 76-118 milliliters (ml) and 90-140 grams (gr).
